How to use this tool

“How to use FPC Coverage Calculator” This simple to use calculator gives you an estimate of powder required (in lbs and kgs) to finish the job.
Please enter the required values in the input section and click calculate to generate your result.

Estimated Sq. Footage: Square feet of your part where Square Foot is Length x Width.

Specific Gravity: Value for this should be provided in the technical data sheet of the product in use. You can also check this in the Resources & downloads section of our website.

Transfer Efficiency: Transfer efficiency is the ratio of the quantity of powder deposited on the part to the quantity of powder directed at the part.

Mil Thickness: how much powder you want to apply or how thick you want your coatings to be.

Sq.ft coverage per Lb: How much area 1 lb of powder will cover theoretically

Coverage per Kg: How much area 1 Kgof powder will cover theoretically

Estimated lbs required: How many Lbs do you need to complete the job.

Estimated kgs required: How many kgs do you need to complete the job.

* Please note that this is an estimate and should only be used as a guide. Accurate requirements depend upon product and application etc.